GSIKE Power 2.5KW Solar Inverter 12V 220V Off Grid Inverter 120A MPPT Solar Controller With WIFI
Estimate delivery times: 2-7 Business days (European Union, United States).
Return within 30 days of purchase. Duties & taxes are non-refundable.
GSIKE Power 2.5KW Solar Inverter 12V 220V Off Grid Inverter 120A MPPT Solar Controller With WIFI
Description
GSIKE 2kW 12V Off-Grid Hybrid Solar Inverter, Single 60A MPPT, 3000VA Surge, Battery-Free
Final Verdict: GSIKE G2500EU12V = 2000W/2kVA continuous, 3000VA surge, single MPPT 60A, up to 900W PV (30–160V), 12V, battery-free, optional WiFi, no parallel. At 149.99 EUR instead of 280.00 EUR, free delivery to 15 EU countries, 30-day returns and warranty.
2kW2kVA12V3000VAsingle MPPT60A900W PV30–160Voptional WiFino parallel149.99 EUR

Full technical specification (G2500EU12V, 12V)
This table consolidates the manual and rating-plate figures of the 12V hybrid; the listing name 2.5KW is a marketing label, the continuous rating is 2000W. The spec sheet prevails on conflict. The battery provides the reserve for cloudy days and night operation. Its capacity is chosen from daily consumption and the desired autonomy days, respecting the depth of discharge of the chemistry. Lead-acid tolerates shallower depth and more frequent top-ups; LiFePO4 accepts deeper cycles. Regardless of chemistry, care for equal cell voltage, the correct charge profile and current sizing, because a mismatched profile shortens life more than the cycles themselves. When comparing models, match the same class: continuous kW, starting peak, MPPT current and range, acceptable PV wattage, battery input voltage, number of outputs and Wi-Fi connection. The listing name may not match true continuous power, so read the manual table and rating plate. A cheaper model with a smaller MPPT or no monitoring can behave worse under real load, so total value depends on the sum of parameters, not the ad slogan.
| Parameter | Value (engineering manual GSK-2KW-12V-WIFI) |
|---|---|
| Continuous AC power | 2000 W / 2 kVA pure sine, 220/230 VAC, 50/60 Hz — the "2.5KW" listing name, not the continuous rating |
| Surge power | 3000 VA (1.5× continuous) , for motor and fridge startup |
| MPPT charger | Single MPPT ; max solar charge current 60 A (PV input 50 A) — not a dual-MPPT unit |
| PV input | MPPT working range 30–160 VDC ; max open-circuit voltage 160 VDC ; maximum PV array 900 W (practical ~750 W = 3×250W) |
| Charging currents | Solar MPPT 60 A / AC mains charge 80 A / PV+AC combined max 120 A (the title's "120A" is this combined total, not a 120A solar charge) |
| Waveform / power factor | Pure sine wave, PF 0.6–1.0; works without a battery |
| Battery / AC output | 12 V DC (float 13.5 V, overcharge protection 14.1 V) · 230 V AC (±5%), 50/60 Hz auto |
| AC outputs | Two terminals — Main output + Second output , shared 2000 W total (this is "Dual Output", not dual MPPT) |
| Parallel capacity | None — single unit only, cannot be paralleled or stacked |
| UPS transfer | About 10 ms (PC loads) / 20 ms (appliance loads) on grid outage |
| Efficiency | PV→inverter 96%, battery→inverter 93% |
| Monitoring & ports | WiFi (external / optional module), RS232, RS485 for LiFePO4, dry-contact generator / ATS, LCD |
| Price / stock | €149.99 EUR · In stock, new condition, SKU G2500EU12V, valid from 2026-05-28 |
| Delivery / returns | Free shipping to 15 European countries (1–3 days handling + 2–7 days transit) · 30-day returns |
Pure sine 220–230V output, 12V battery; single unit only, cannot be paralleled.
Which 2kW / 12V inverter – GSIKE in comparison
The table compares same-class 12V units; October 2026 prices are approximate and the checkout decides. Cables and fuses are often underestimated but are a decisive part of a safe installation. At the battery's low voltage the current is high, so conductors must be short, thick and sized by current and length, keeping voltage drop and heating within normal limits. On every safety boundary (battery, panel, output) use a properly rated fuse and isolator switches; an undersized cable can overheat, and the fuse protects against short circuit and fire. European availability and logistics affect delivery speed and return conditions. Confirm warehouse location, estimated lead time, return rules and spare-parts/support availability before buying. Prices in EUR may be shown without hidden fees, but the final price, duties and local taxes are always confirmed by the checkout. Warranty terms and the possibility of support matter more than a single monthly discount badge.
| Model | Continuous | MPPT / PV | WiFi | Price (approx.) |
|---|---|---|---|---|
| GSIKE G2500EU12V | 2000W | single MPPT 60A, 900W | optional | 149.99 EUR |
| EASUN 2kW 12V | 2000W | 50A, ~700W | optional | ~189 EUR |
| PowMr 2kW 12V | 2000W | 50A, ~700W | key | ~179 EUR |
GSIKE keeps 2000W continuous, 60A MPPT, 900W PV headroom and 149.99 EUR instead of 280.00 EUR.
What the 2kW inverter handles – continuous load and startup
The table lists typical appliances; the 3000VA surge starts fridges and pumps, the continuous limit is 2000W. Connecting the inverter to the grid and generator has a precise procedure and switch order. Always isolate the input branches first, then connect battery, panel and AC circuit, and finally set the charge profile and parameters. Off-grid and backup mode require a clean output waveform and fast transfer time; sensitive electronics, computers and network gear need a stable wave without oscillation. Have all work checked by a qualified electrician if you do not hold the relevant competence. Safety rules for an isolated installation: never work live, protect every branch against short circuit and sparks, protect the battery against overcharge and deep discharge, and do not exceed the continuous output limit. A pure sine wave protects sensitive electronics but does not replace correct cable and fuse sizing. If you are unsure of the wiring or battery profile, use a qualified installer; a wrong install endangers equipment and safety.
| Appliance | Power | Runs? |
|---|---|---|
| LED, router, phone, TV | 30–80W | Yes; stable pure sine wave |
| 100 l fridge | ~80W cont., ~400W start | Yes; 3000VA starts the compressor |
| Laptop / small electronics | 60–150W | Yes |
| Water pump 12V small | 300W, high start | Yes; surge spins the motor |
| Coffee machine | 800–1000W | Yes, individually |
| Microwave 900W | ~1400W input | Yes, individually within 2kW |
| Heater above 2000W | over 2000W | No; exceeds continuous limit |
Loads above the 2000W continuous total belong to a larger-class inverter.
Expansion: parallel, battery-free operation, PV/AC/MPPT/DC/WiFi/protections
Single standalone unit; no parallel, runs on a battery or battery-free by day. Wi-Fi and monitoring let you track voltage, power, charge current and battery state directly on a phone or computer. The app shows daily gain, consumption and history, so you can spot overload or a failing cell before a fault. Daytime battery-free running with clear sun is practical, but overnight and continuous backup need the battery bank; monitoring helps distinguish array-only running from battery running.
| Area | Detail |
|---|---|
| Battery voltage | 12 V DC; float charge 13.5 V, overcharge protection at 14.1 V |
| Full-load DC current | 2000 W / 12 V = 166.7 A ideal; at 93% efficiency ≈ 179 A — this is why the 12V battery cables must be very thick and short |
| Battery-free operation | Supported — runs on PV or mains alone; no night power after sunset without a battery |
| Parallel operation | No — single unit only, cannot be paralleled with another unit |
| Communication | WiFi (external / optional module), RS232, RS485 for LiFePO4, dry-contact for generator / ATS, LCD |
| Casing / ingress | Detachable dust cover only; no IP rating is stated by the manual — use indoors / in a sheltered space |
| Operating temperature | −10 °C to +50 °C (storage −15 to +60 °C); humidity 5–95% non-condensing |
| Dimensions | 358 × 295 × 105.5 mm (package 465×380×175 mm) |
| Net weight | 6.0 kg |
| Protection | Overload, short-circuit, over-temperature, battery over-voltage / under-voltage |
12V full-load current is high (~179A), so keep battery cables thick and short and add fuses per the manual.
Charge curve, single MPPT and operating conditions
Parameters follow the manual; the spec sheet prevails on conflict. Maintenance extends equipment life: check terminal torque, ventilation cleanliness and cooling regularly in a dry, airy room free of damp and dust. Watch charge voltage and any cell heating, and after a few years confirm battery condition and connection tightness. Avoid high humidity, dust or frost risk; respect the operating and storage temperatures stated in the manual.
| Parameter | Value |
|---|---|
| MPPT trackers | One single MPPT channel ; max solar charge current 60 A (max PV input current 50 A) |
| PV input voltage range | MPPT working range 30–160 VDC; maximum open-circuit voltage 160 VDC |
| Maximum PV array | Up to 900 W ; official example is 3×250W modules (3×36 V Vmpp ≈ 108 V, 120 V Voc < 160 V) |
| Why ~750W is the sweet spot | Raw 900 W / 12 V ≈ 75 A, but the solar charge stage caps at 60 A — practical usable PV is ~750 W (3×250W) |
| AC (mains) charge current | 80 A; maximum combined PV+AC charge 120 A |
| Battery charge profile | CC/CV; float 13.5 V, overcharge protection 14.1 V; supports lead-acid, gel and LiFePO4; LiFePO4 activation by PV (RS485) |
Indoor sheltered space; no IP rating stated, keep away from damp and dust.
Honest advantages and limitations
Advantages
- 2000 W continuous pure-sine 230V AC with a 3000 VA (1.5×) surge — enough to start and run a refrigerator, TV, laptop, lights, a small pump and kitchen essentials in a camper, cabin or garden office.
- Single 60 A MPPT accepts up to 900 W of PV (MPPT 30–160 V, 160 V Voc ceiling); the official 3×250W example (~750 W) matches the 60 A charge cap.
- Dual AC output terminals (Main + Second, shared 2000 W) let you split critical loads from the rest, with ~10 ms PC / 20 ms appliance transfer on a grid outage.
- Genuine battery-free operation on PV or mains, with UTL / SOL / SBU / SUB priority modes and PV-only LiFePO4 activation.
- €149.99 puts this in the sub-€160 band and near the front of the verified EU-warehouse 12V 2kW hybrids — essentially tied with EASUN's 2.2kW 12V (€151.73) and under DATOUBOSS 1800W (€159.99), PowMr (~€165), Daxtromn (~€175) and ANENJI (~€184).
- Compact 6.0 kg / 358×295×105.5 mm chassis; 96% PV→inverter efficiency; free shipping to 15 European countries in 2–7 days, 30-day returns.
Limitations
- 2000 W engineering ceiling, not 2.5 KW — the storefront name says 2.5KW but the manual rates 2000 W / 2 kVA continuous; plan loads for 2000 W, not 2500 W.
- No parallel / stacking — single unit only; you cannot stack two to reach 4 kW. The "Parallel 6 units" icon is a 48V large-model template error.
- Single MPPT (one 60 A channel); "Dual Output" is the two AC terminals, not two solar trackers.
- 12V means very high current — full load pulls ~167–179 A, so the battery cables must be very thick (about 50–70 mm² ) and kept short (1 m class); longer runs force even heavier copper.
- 12V is not a whole-house voltage — for larger homes step up to a 24V/48V model, where the same power halves the current and the cable size.
- Max PV only 900 W (practical ~750 W) and solar charge capped at 60 A — this is a small-array, short-run class, not a big-roof system.
Eight real use cases of the GSIKE 2kW 12V hybrid
Use-case images in fixed order; each shows an honest European application.

Family camper van
A compact inverter on the bench wall runs the fridge, charger and lights at a quiet rural European campsite — the classic 12V short-run install. The GSIKE "2.5KW" 12V off-grid hybrid inverter is, in engineering terms, a 2000W / 2kVA continuous pure-sine 230V unit with a 3000VA (1.5×) surge, a single 60A MPPT solar charger for a PV array of up to 900W, two real AC output terminals, genuine battery-free operation and optional external WiFi — sold across Europe at €149.99 struck from a real €280.00 regular price (46% off, Save €130.01), with free delivery to 15 countries and a 30-day return window.

Provence caravan
A static caravan with a small roof array powers its own lighting, TV and small kitchen loads without a full grid connection. A small forest cabin uses a few panels and one wall inverter for lights, a small fridge and phone — essentials only, inside the 900 W PV cap.

Swedish log cabin
A small forest cabin uses a few panels and one wall inverter for lights, a small fridge and phone — essentials only, inside the 900 W PV cap. A four-panel van roof array (~900 W) feeds the inverter below the eaves — right at the maximum PV ceiling, with 3 panels the sweet spot.

Dutch garden office
A home-working summerhouse runs a laptop, router, lamp and small fan from PV and a 12V battery — short, thick battery cables inside one building. Installed this 2kW inverter with a 12V lithium battery and solar panels. Pure sine wave output is stable and it runs my fridge, lights and laptop without issues.

Spanish tool shed
A workshop shed powers bench lighting, a small charger and a pump off-grid — the dual second output can feed the pump separately. Installed this 2kW inverter with a 12V lithium battery and solar panels. Pure sine wave output is stable and it runs my fridge, lights and laptop without issues.

Austrian tiny home
A tiny house on wheels uses a few roof panels for cooking, refrigeration and entertainment — a single-room, off-grid lifestyle load. Installed this 2kW inverter with a 12V lithium battery and solar panels. Pure sine wave output is stable and it runs my fridge, lights and laptop without issues.

Apartment backup
A small utility closet keeps a fridge, router and lights on a 12V battery during short outages; the ~10 ms transfer supports PC loads. Installed this 2kW inverter with a 12V lithium battery and solar panels. Pure sine wave output is stable and it runs my fridge, lights and laptop without issues.

Van roof array
A four-panel van roof array (~900 W) feeds the inverter below the eaves — right at the maximum PV ceiling, with 3 panels the sweet spot. The listing is named "2.5KW", but the linked engineering manual for model GSK-2KW-12V-WIFI — confirmed by the main spec image and the official PV table — rates continuous output at 2000W / 2kVA with a 3000VA (1.5×) surge. "2.5KW" is the storefront tier name. Size your loads for 2000W continuous, not 2500W.
Official product photo
Official manufacturer images: front panel, MPPT and install; the manual table prevails.





Shipping, return and service (EU, 15 countries)
| Item | Detail |
|---|---|
| Price | 149.99 EUR sale, struck from 280.00 EUR · in stock, new (valid from 2026-05-28) |
| Free delivery to | GB, DE, FR, IT, ES, NL, BE, AT, SE, DK, FI, IE, PT, PL, CZ (15 EU countries) |
| Handling / transit | 1–3 days handling + 2–7 days transit, shipping rate 0 EUR |
| Returns | 30-day return window from delivery, original condition and packaging |
| Warranty & support | manufacturer warranty terms, technical support |
Prices in EUR; final logistics, duties and taxes are confirmed at checkout.
Häufig gestellte Fragen
Is this inverter really 2.5KW — or is it 2000W?
The listing is named "2.5KW", but the linked engineering manual for model GSK-2KW-12V-WIFI — confirmed by the main spec image and the official PV table — rates continuous output at 2000W / 2kVA with a 3000VA (1.5×) surge. "2.5KW" is the storefront tier name. Size your loads for 2000W continuous, not 2500W. No. The solar MPPT charge is 60A (50A PV input), the AC mains charger is 80A, and the maximum combined PV+AC charge is 120A. The "120A" in the title is that combined total, not a 120A solar charge. Never size your array around a 120A solar figure.
What does the title's "120A" mean — is that a 120A solar charge?
No. The solar MPPT charge is 60A (50A PV input), the AC mains charger is 80A, and the maximum combined PV+AC charge is 120A. The "120A" in the title is that combined total, not a 120A solar charge. Never size your array around a 120A solar figure. No. The manual lists Parallel Capability = NO — this is a single-unit inverter with a hard ceiling around 2000W. The infographic's "Parallel 6 units" icon is a 48V large-model template error. If you need more than about 2000W continuous, choose a larger 24V or 48V model rather than stacking this one.
Why can't I stack two of these 12V inverters to reach 4kW?
No. The manual lists Parallel Capability = NO — this is a single-unit inverter with a hard ceiling around 2000W. The infographic's "Parallel 6 units" icon is a 48V large-model template error. If you need more than about 2000W continuous, choose a larger 24V or 48V model rather than stacking this one. It is a single MPPT. "Dual Output" means two real AC terminals — a Main output and a Second output, both shared within the 2000W total — so you can separate critical loads. It is not two MPPT trackers, and this page never claims dual MPPT.
On this 2000W unit, does "Dual Output" mean two MPPT trackers, and what are the two AC terminals for?
It is a single MPPT. "Dual Output" means two real AC terminals — a Main output and a Second output, both shared within the 2000W total — so you can separate critical loads. It is not two MPPT trackers, and this page never claims dual MPPT. There is one single MPPT working from 30 to 160 VDC with a 160V maximum open-circuit voltage, and the maximum PV array is 900W. Because the solar charge stage caps at 60A, the practical sweet spot is ~750W — the official example is three 250W panels in series (about 108V, 120V Voc under the 160V ceiling). The generic bullet's 500V / 100–120A figures are discarded template errors.
What size PV array does it accept — why only 900W?
There is one single MPPT working from 30 to 160 VDC with a 160V maximum open-circuit voltage, and the maximum PV array is 900W. Because the solar charge stage caps at 60A, the practical sweet spot is ~750W — the official example is three 250W panels in series (about 108V, 120V Voc under the 160V ceiling). The generic bullet's 500V / 100–120A figures are discarded template errors. This is a 12V-only inverter (float 13.5V, overcharge protection 14.1V). At full 2000W it draws about 167A ideal (179A at 93% efficiency), so plan very thick, short battery cables — roughly 50–70 mm² for a 1% drop over just 1m — and keep the battery close to the inverter. A 12.8V 100Ah LiFePO4 gives ~1280Wh (~1024Wh usable at 80% depth of discharge), about half an hour at full 2000W; plan ~167Ah for one hour at 2000W.
What 12V battery and cables does it need?
This is a 12V-only inverter (float 13.5V, overcharge protection 14.1V). At full 2000W it draws about 167A ideal (179A at 93% efficiency), so plan very thick, short battery cables — roughly 50–70 mm² for a 1% drop over just 1m — and keep the battery close to the inverter. A 12.8V 100Ah LiFePO4 gives ~1280Wh (~1024Wh usable at 80% depth of discharge), about half an hour at full 2000W; plan ~167Ah for one hour at 2000W. Yes. Buyers report a fridge, lights and laptop running steadily on pure-sine output, and the 3000VA surge can start a small fridge or pump. Stay within 2000W continuous total — this is a camper, cabin, garden-office and backup-essentials class, not a whole-house system.
Can it run without a battery?
Yes — it is specified to run on PV or mains with no battery connected, and LiFePO4 packs are activated from PV. The honest trade-off is that battery-free mode gives no power once the sun is down, so a 12V LiFePO4 bank is still required for evening or night loads. The price is €149.99 EUR struck from €280.00 (46% off, Save €130.01), in stock and new (SKU G2500EU12V). Shipping is free to 15 European countries (GB, DE, FR, IT, ES, NL, BE, AT, SE, DK, FI, IE, PT, PL, CZ) with 1–3 days handling plus 2–7 days transit, and a 30-day return window by post. The manual states no IP rating — only a detachable dust cover — so use it indoors or in a sheltered space; support is English-only and WiFi is an optional external module.
Will it run my fridge, TV and laptop?
Yes. Buyers report a fridge, lights and laptop running steadily on pure-sine output, and the 3000VA surge can start a small fridge or pump. Stay within 2000W continuous total — this is a camper, cabin, garden-office and backup-essentials class, not a whole-house system. WiFi monitoring is an optional external module (reviewers find the remote status check useful). RS485 supports LiFePO4 communication and RS232 is also provided; a dry-contact connection supports a generator or ATS. The LCD sets the UTL / SOL / SBU / SUB output-priority modes, and the unit switches in about 10ms for PC loads (20ms for appliances) on a grid outage.
How much is it, and what about shipping, returns and an IP rating?
The price is €149.99 EUR struck from €280.00 (46% off, Save €130.01), in stock and new (SKU G2500EU12V). Shipping is free to 15 European countries (GB, DE, FR, IT, ES, NL, BE, AT, SE, DK, FI, IE, PT, PL, CZ) with 1–3 days handling plus 2–7 days transit, and a 30-day return window by post. The manual states no IP rating — only a detachable dust cover — so use it indoors or in a sheltered space; support is English-only and WiFi is an optional external module. When designing an off-grid or hybrid system, start from real daily consumption: list every permanent and starting appliance, its rated power and run time, then build a daily energy budget in Wh. Only after that choose the inverter, PV array and battery; buying the equipment first and sizing the load later leads to undersizing or needlessly high cost. Homes, caravans, holiday cabins and workshops have different load profiles, so a generic recommendation for a fridge, pump or heat pump is always individual.
Does it have WiFi, LiFePO4 communication and output modes?
WiFi monitoring is an optional external module (reviewers find the remote status check useful). RS485 supports LiFePO4 communication and RS232 is also provided; a dry-contact connection supports a generator or ATS. The LCD sets the UTL / SOL / SBU / SUB output-priority modes, and the unit switches in about 10ms for PC loads (20ms for appliances) on a grid outage. The MPPT charge controller is the heart of solar charging: it tracks the maximum-power point of the panels and adjusts voltage so the battery receives as much energy as possible. Compare not only the total controller current but also the panel-voltage range and the module wattage it accepts; an undersized MPPT does no damage but limits array harvest. Wire panels in series or parallel so the working voltage falls inside the controller range, respecting insulation and fuses on the PV side.







