Gsike TELLUS-T1500 Pro vs EcoFlow DELTA 3: Which 1500W Solar Generator Is Better
A side-by-side look at two compact one-kWh stations: stored energy, outlet spread, solar pairing, recharge speed, expansion path, carry weight, and what each one costs.
At a glance, the Gsike TELLUS-T1500 Pro carries a 1008Wh automotive-grade LiFePO4 pack labeled 315,000 mAh and runs 1500W of continuous pure sine wave AC, listed at $910.00. The EcoFlow DELTA 3 holds a 1024Wh LFP battery rated at 1800W total AC output with a 3600W surge, shown on the EcoFlow US store around $679.00 with panel bundles priced separately. The DELTA 3 leads on nameplate output, outlet count, expansion options, app features, and cycle count, while the Gsike answers with a slightly lighter chassis, a higher solar input ceiling, three protected outlets, a 10 ms UPS switchover, and an 850W wall refill.
This comparison is aimed at buyers shopping the compact solar-generator bracket who want to know which station matches their fridge, router, laptop, camera, and occasional tool loads. Gsike figures below are taken from the verified TELLUS-T1500 Pro specifications; EcoFlow figures follow the current US product page reviewed for this post, and prices or bundles can change, so recheck each official listing before checkout.
Both units are battery-based rather than fuel-driven, which means quiet operation, no exhaust to vent indoors, and no pull-start or engine maintenance. The chemistry on both sides is lithium iron phosphate, so the real choice comes down to output headroom, how many devices you plug in at once, whether you want to add capacity later, how the app ecosystem fits your workflow, and what you are prepared to pay.
One rating caveat on the Gsike side matters for load planning: the manufacturer publishes a 1500W continuous figure but has not released a peak or surge number for this model. We do not quote an unstated peak. Size compressors, motors, and tools against the 1500W continuous rating, and treat any startup spike conservatively.
How do the Gsike TELLUS-T1500 Pro and EcoFlow DELTA 3 compare on paper?
The two stations target the same backup, RV, and off-grid buyer, but their spec sheets emphasize different strengths. The table below gathers the headline numbers most shoppers compare first: capacity, output, outlets, longevity, weight, recharge routes, expansion, and listed price.
| Specification | Gsike TELLUS-T1500 Pro | EcoFlow DELTA 3 |
|---|---|---|
| Battery capacity | 1008Wh LiFePO4 (LFP), 315,000 mAh | 1024Wh LFP pack |
| Continuous AC output | 1500W continuous, pure sine wave; peak/surge not published | 1800W total continuous; X-Boost supports devices up to 2200W |
| Surge rating | No published peak figure; plan loads to the 1500W continuous rating | 3600W surge |
| AC outlets | 3 covered outlets behind protective dust/waterproof slide-open covers | 6 AC outlets |
| Cycle life | 3,500+ cycles to at least 80% remaining capacity | 4000 cycles to 80% capacity |
| Weight | 12 kg, about 26.5 lb | About 12.5 kg / 27.6 lb |
| Dimensions | 355 x 245 x 275 mm (35.5 x 24.5 x 27.5 cm) | 397.6 x 202 x 283.6 mm (15.7 x 8.0 x 11.2 in) |
| Wall recharge | 850W fast charge, roughly 80-90 minutes to full | 1500W AC input, full charge in 56 minutes per EcoFlow |
| Solar input | Up to 600W panels, about 1.8 hours to full in good sun | 500W MPPT max, full charge in about 2 hours |
| Expansion | Fixed-capacity base unit; no add-on battery listed | Expandable up to 5kWh with compatible DELTA 3, DELTA Pro 3, DELTA 2, or DELTA 2 Max extra batteries |
| Smart control | No app, Wi-Fi, or Bluetooth control listed in verified facts | EcoFlow app with time-of-use settings and storm warning alerts |
| Current listed price | $910.00 USD | Around $679.00 on the EcoFlow US listing; panel bundles vary |
Reading the spec gap
The DELTA 3 stores a near-identical amount of energy, about 1.6 percent more than the Gsike, and pairs it with higher continuous wattage, a named 3600W surge, six outlets, and a path to 5kWh of expandable capacity. It also brings app-based monitoring, a four-thousand-cycle rating, and a five-year warranty on the reviewed listing.
The Gsike stays competitive through its lighter 12 kg body, the 600W solar ceiling, protected outlet covers, a published 10 ms UPS transfer, and an 850W wall refill inside about 90 minutes. Where the EcoFlow builds an expandable ecosystem around extra batteries and smart alerts, the Gsike stays a straightforward fixed-capacity station whose value rests on the hardware itself.
Which has the better capacity-to-weight balance for home backup and travel?
Capacity per pound is one of the clearest portability checks in this class. The Gsike packs 1008Wh into 12 kg (about 26.5 lb), while the DELTA 3 holds 1024Wh at roughly 12.5 kg (27.6 lb). The two weights sit within about half a kilogram of each other, and the Wh difference is barely noticeable in everyday runtime.
That near-tie means most shoppers will not choose on weight alone. The Gsike edges lighter by roughly 1.1 lb, a small advantage on stair climbs and vehicle loading; the EcoFlow offsets its slightly heavier shell with a wider footprint layout that spreads the internal battery and six outlets across a longer body.
For home backup, both units slot into a garage corner, hallway nook, or kitchen pantry without needing a dedicated utility room. For travel, the deciding factor is how often you lift the station: a weekend camper moving it between vehicle and campsite every trip will feel the small Gsike advantage, while a homeowner who parks it beside the breaker panel will barely register the half-kilogram gap.
Stored energy decides what you can keep alive after the last recharge. The verified Gsike runtimes cover a 20W drone for 50 charges, a 50W laptop for 20 charges, a 20W tablet for 50 charges, a 200W studio light for 5 hours, a 40W camera for 25 charges, and a 30W display for 33.6 hours. On the DELTA 3's slightly larger 1024Wh pack, comparable devices run a hair longer, all else equal.
How do continuous output and outlet count compare for mixed appliances?
Continuous watts measure the steady load a station can sustain, while the surge rating covers the brief startup spike that compressors and motors draw when they first turn over. The DELTA 3 is rated 1800W total continuous with a 3600W surge, and its X-Boost mode supports devices up to 2200W; those are the higher output figures in this comparison.
The Gsike TELLUS-T1500 Pro supplies 1500W continuous through a pure sine wave inverter across three covered outlets. Its peak number is not published, so conservative planning keeps combined loads at or under 1500W. Pure sine wave delivery protects sensitive electronics and motor controllers from the rough waveform that modified sine wave inverters can feed to tool drives and recording equipment.
Outlet count is a practical everyday difference. The DELTA 3 spreads its output across six AC outlets, plus dedicated USB and DC positions, which makes it easy to attach a fridge, a TV, a charging hub, a small appliance, and lights without a power strip. The Gsike provides three covered AC outlets, each shielded by a slide-open dust and splash cover that keeps the socket cavity clean on rough surfaces.
For a typical mixed home load such as one fridge, a router, LED lamps, and a laptop, combined draw usually stays within the Gsike's 1500W continuous envelope. The EcoFlow's higher continuous figure, 3600W surge, and X-Boost become relevant when you plan a microwave, space heater, hair dryer, or several high-draw appliances together on one station.
Compressor startup deserves a careful look on both sides. A fridge or freezer pulls several times its running wattage for a split second when the compressor kicks in, and a station that trips on that spike fails to protect the appliance through the night. Because the Gsike publishes no surge figure, it suits light-to-moderate motor loads; the DELTA 3's named 3600W surge is the explicit margin for motor-heavy appliances.
What solar input and recharge routes and speeds does each offer?
Solar pairing decides how much daytime sunlight restores the pack when wall power is unavailable. The Gsike accepts up to 600W of panels through its DC input and reaches full in about 1.8 hours under good sun; it also recharges from the wall at 850W in roughly 80 to 90 minutes and from a 12V car outlet through the car port.
The DELTA 3 lists five replenishment methods: AC wall, solar, an 800W alternator car charge in about 1.3 hours, a smart dual-fuel generator, and combined AC plus solar multi-charging. Its 500W MPPT solar input reaches full in about 2 hours; its 1500W AC input refills in 56 minutes per EcoFlow testing.
The solar ceiling favors the Gsike on paper: 600W accepted against the DELTA 3's 500W MPPT max, with a published 1.8 hour solar refill slightly ahead of EcoFlow's 2-hour estimate. Real solar yield still tracks panel angle, sunlight strength, weather, and temperature, typically returning a share of the panel's rated wattage on an average day. Neither station ships with a panel in its base configuration.
Wall recharge speed favors the EcoFlow in this matchup. Its 1500W AC input and 56-minute full charge are the faster home-top-up figure, while the Gsike's 850W wall refill lands in the 80 to 90 minute range. For storm preparation, both are quick enough to refill after a recent outage; for a lunchbreak site top-up, the DELTA 3's higher input closes the gap in less time.
Car charging is another difference. The DELTA 3's reviewed spec lists an 800W car charge route that reaches full in about 1.3 hours, while the Gsike recharges through a standard 12V car port without a published high-wattage car input figure. If your travel plan leans heavily on vehicle charging, check the exact car source wattage you can provide.
When it comes to cycle counts, BMS safeguards, and warranty terms, how do they differ?
Both stations run lithium iron phosphate cells, the chemistry chosen for heat stability and a long service life over older NMC packs. The Gsike pack is rated 3,500+ cycles to at least 80% remaining capacity, monitored by an eight-function BMS that covers low voltage, short circuit, overheat, low temperature, overvoltage, current overload, overload, and battery failure.
The DELTA 3 reaches a longer rated 4000 cycles to 80% capacity, using third-generation LFP cells, an IP65-rated battery pack, and a BMS with more than forty protective measures against current, voltage, and temperature risks. On cycle count alone, the EcoFlow names the higher number before dropping to the 80% retention mark.
Warranty and protection packaging add to the longevity story. The reviewed EcoFlow listing states a five-year warranty and the IP65 pack resistance to splash and dust. The Gsike lists FC, CE, UL, UN38.3, MSDS, and RoHS certifications, active cooling with four fans and two air ducts, and a rugged industrial shell with a non-slip pad; verify the current Gsike store warranty terms alongside the product listing before buying.
Cycle rating and warranty are not the same commitment. The cycle figure describes how many full charge-discharge loops the cells tolerate, while warranty terms are set by each brand and can differ by region. Frequent campers, RV users, and repeated-outage households should weigh both numbers together rather than relying on the cycle count alone.
Which ports matter for a fridge, router, laptop, camera, and phone charging?
The Gsike panel combines three covered AC outlets with three Type-C ports, three USB-A ports, a 5W wireless pad on top, a car/cigarette port, and separate DC outputs. Individual USB port wattages are not labeled in the verified facts, so match your cable and device to the port you use.
The DELTA 3 spreads thirteen output positions across six AC outlets, two 100W max USB-C ports, two 18W USB-A ports, one 12.6V/10A car output rated 126W max, and two 12.6V/3A DC5521 ports. Its dual 100W USB-C sockets can power two high-wattage laptops at once without adapters.
For a fridge-first backup, the AC outlets carry the compressor load while USB and DC positions handle the router, phone stack, and camera batteries at the same time. The EcoFlow's six outlets and dual fast USB-C give more simultaneous plug positions, which helps when several people charge devices around one station; the Gsike balances three AC outlets with six USB sockets for a mixed device crowd.
Camera and drone charging fit the verified Gsike figures: a 40W camera battery charges 25 times and a 20W drone battery 50 times on a full pack. A 50W laptop charges 20 times and a 20W tablet 50 times. On the DELTA 3's 1024Wh pack, those device counts shift slightly upward with the extra stored energy.
Wireless charging appears differently on the two units. The Gsike tops the case with a 5W wireless pad for a slow but convenient break-time refill; no wireless pad appears in the reviewed DELTA 3 spec list. If contactless phone charging is a feature you expect, the Gsike includes one at a modest wattage.
What is the difference in price, and which accessories come with each unit?
The ticket prices open a clear gap. The Gsike TELLUS-T1500 Pro is listed at $910.00 USD, while the EcoFlow DELTA 3 appears around $679.00 on the US store, with solar panel bundles listed at separate price points. On upfront cost alone, the DELTA 3 sits lower in this comparison.
| Value factor | Gsike TELLUS-T1500 Pro | EcoFlow DELTA 3 |
|---|---|---|
| Listed price | $910.00 USD | Around $679.00; panel bundles vary |
| Stored energy | 1008Wh LFP | 1024Wh LFP |
| Continuous output | 1500W, peak not published | 1800W, 3600W surge, X-Boost to 2200W |
| AC outlets | 3 covered | 6 |
| Expansion path | Fixed base capacity | Up to 5kWh with compatible extra batteries |
| Solar input | Up to 600W, about 1.8 h to full | 500W MPPT, about 2 h to full |
| App features | None listed in verified facts | EcoFlow app, TOU settings, storm alerts |
Included accessories shape the real total. The Gsike box contains the station, the AC wall cable, and the car charging cable; a solar panel is not included. EcoFlow listings sell the DELTA 3 in different panel bundles, so compare the exact bundle contents before treating any price as apples-to-apples.
Value depends on what the money buys. If lower upfront price, six outlets, expandable capacity, app alerts, and the higher surge margin top your list, the DELTA 3 presents the broader feature package. If protected outlets, the higher solar ceiling, light carry, and a no-app straightforward hardware build matter more, the Gsike allocates the budget differently.
The Gsike TELLUS-T1500 Pro sells for $910.00 USD through the official Gsike US store.
Can either add expansion battery capacity later?
Expansion is one of the structural differences between these two stations. The DELTA 3 connects to compatible extra batteries from the DELTA 3, DELTA Pro 3, DELTA 2, and DELTA 2 Max families, growing the system up to 5kWh of stored energy. That path suits buyers who want to start with a compact base and add reserve as their outage or cabin load grows.
The Gsike TELLUS-T1500 Pro is a fixed-capacity base unit. No add-on battery path is listed in its verified facts, so total stored energy stays at the 1008Wh pack for the life of the unit. Multi-day off-grid stays or a growing whole-home backup plan would need to be sized around that fixed reserve rather than upgraded later.
Expansion decisions should be made early in the purchase. Adding a second battery down the road usually means choosing a platform that supports it from day one, since swapping to a larger station later means replacing the base unit. If you expect your power needs to grow toward long outages or a permanent cabin system, the EcoFlow's expansion ladder is the clearer upgrade route.
If your household plan stays around one fridge, lights, router, and small devices for single-evening outages, a fixed 1008Wh pack covers the common scenario without the added cost and complexity of extra batteries. Expansion also adds weight, footprint, and a second warranty item to track, which some buyers would rather avoid.
How do they perform running a fridge, TV, laptop, and tools off-grid or at a site?
Real-world performance follows the same load math on either station: stored Wh times the usable efficiency share, divided by the running wattage of each device. A residential fridge cycles its compressor, averaging well below nameplate wattage over a day, while a TV, laptop, and router draw light steady loads that extend runtime considerably.
On the Gsike, verified examples include five hours for a 200W studio light, 33.6 hours for a 30W display, 20 laptop charges at 50W, and 50 tablet charges at 20W. A fridge runtime figure is not published in the verified facts, so estimate it from your appliance's own cycling wattage rather than assuming a generic number.
On a worksite, continuous watts and waveform quality decide which tools run well. Drills, orbital sanders, oscillating tools, LED work lights, and shop vacs under the 1500W continuous ceiling run comfortably on the Gsike's pure sine wave output. A 15A circular saw or heavy miter saw that draws 1,400 to 1,800W at load can push past that ceiling, and the EcoFlow's 1800W continuous rating with 3600W surge leaves more headroom for such motor tools.
Off-grid cabin use pairs the station with panels sized to your daily Wh needs. The Gsike's 600W solar input refills faster in good sun, while the DELTA 3's 500W MPPT and expansion batteries suit a setup planned to grow over time. Quiet battery operation keeps both units usable inside a tent, cabin, or home where a gas generator would be restricted by noise and exhaust rules.
Pros and cons: Gsike TELLUS-T1500 Pro
Pros
- Slightly lighter at 12 kg / about 26.5 lb for one-person carry between rooms and vehicles
- 600W solar input with a published about 1.8 hour refill in good sunlight
- Three covered AC outlets protect plugs and sockets from dust and splashes
- 10 ms UPS switchover keeps a router, workstation, or bedside critical device from dropping
- 850W wall fast charge restores the pack in roughly 80-90 minutes
- 3,500+ LiFePO4 cycles to at least 80% capacity with an eight-function BMS
Cons
- $910.00 price sits above the DELTA 3's around $679.00 listing
- 1500W continuous and the unpublished peak trail the EcoFlow's 1800W, 3600W surge, and X-Boost
- Three AC outlets versus the DELTA 3's six, with fixed non-expandable capacity
- 3,500+ cycles sit below the EcoFlow's rated 4000 cycles to 80%
- 5W wireless pad and no listed app control compare lightly against the EcoFlow app ecosystem
- Solar panel is not included in the box
Final verdict: which buyer should choose which station?
Final Verdict: The Gsike TELLUS-T1500 Pro is the better match for the home-backup and weekend outdoor buyer who carries the station themselves, values a 600W solar pairing and three protected outlets for a fridge, router, lights, and laptop, and wants millisecond UPS protection for critical gear at a straightforward fixed-capacity package. That persona covers a household preparing for short outages, tailgate and cabin trips, and light-to-medium tool use, rather than a planner building a multi-battery whole-home system.
The EcoFlow DELTA 3 suits the buyer who prioritizes six outlets, the 1800W output with 3600W surge and X-Boost, a 4000-cycle pack, app-based storm alerts and time-of-use settings, and the ability to expand toward 5kWh with extra batteries later.
If your load stays around one fridge plus essential devices, you move the unit by hand, and you prefer covered outlets, strong solar intake, and a clean hardware-only setup, the Gsike TELLUS-T1500 Pro is the focused pick. If outlet spread, expansion room, smart monitoring, and higher surge headroom drive the decision, the DELTA 3 is the station to weigh against your planned appliance list.
Frequently Asked Questions
Is the Gsike TELLUS-T1500 Pro or the EcoFlow DELTA 3 the better buy?
The answer follows your priorities. The Gsike wins on light carry, solar input ceiling, covered outlet protection, and the 10 ms UPS transfer. The DELTA 3 wins on listed price, continuous and surge wattage, six outlets, cycle count, expansion to 5kWh, and app monitoring. Lay your appliance list against each strength before deciding.
How close are the 1008Wh and 1024Wh capacities in real runtime?
Very close. The DELTA 3's 1024Wh pack holds about 1.6 percent more energy than the Gsike's 1008Wh, so the same load runs only marginally longer on the EcoFlow. The Gsike's verified device charges include 50 drone charges at 20W, 20 laptop charges at 50W, and 5 hours on a 200W studio light.
Which one runs more mixed appliances at once?
The DELTA 3 spreads an 1800W continuous, 3600W surge load across six AC outlets, with X-Boost supporting devices up to 2200W. The Gsike holds 1500W continuous across three covered outlets, and its peak figure is not published, so plan combined loads at or under that 1500W continuous rating.
How do solar input and recharge speeds compare?
The Gsike accepts up to 600W solar for about a 1.8 hour refill in good sun, with 850W wall charge in roughly 80-90 minutes. The DELTA 3 takes 500W MPPT solar for about a 2 hour refill, 1500W AC input for a 56 minute full charge, and an 800W car charge in about 1.3 hours. Panels are not included in either base box.
Which battery lasts more cycles, and what protection does each offer?
The DELTA 3 is rated 4000 cycles to 80% capacity, with an IP65 pack and more than forty protective BMS measures. The Gsike is rated 3,500+ cycles to at least 80% capacity, guarded by an eight-function BMS and certified FC, CE, UL, UN38.3, MSDS, and RoHS. Both are lithium iron phosphate packs built for long service.
How do the port layouts compare for devices and appliances?
The Gsike pairs three covered AC outlets with three Type-C, three USB-A, a 5W wireless pad, a car port, and separate DC outputs. The DELTA 3 lists six AC outlets, two 100W USB-C, two 18W USB-A, one 126W car output, and two DC5521 ports across thirteen total positions. The EcoFlow offers more simultaneous fast-charge sockets; the Gsike adds the wireless pad.
Can the DELTA 3 add expansion batteries, and can the Gsike?
Yes for the DELTA 3, which expands up to 5kWh using compatible DELTA 3, DELTA Pro 3, DELTA 2, or DELTA 2 Max extra batteries. The TELLUS-T1500 Pro, by contrast, keeps its 1008Wh reserve fixed, and no expansion battery socket is described in its verified facts. Pick the EcoFlow if you expect stored energy to grow over time; pick the Gsike if a fixed 1008Wh reserve fits your plan.
Which station is lighter and easier to move between rooms and vehicles?
The Gsike weighs 12 kg, about 26.5 lb, against the DELTA 3's roughly 12.5 kg / 27.6 lb. The Gsike edges out a little lighter, though the gap is only about 1.1 lb. Both are hand-carried single-chassis designs, so daily stair climbs and vehicle loading are manageable on either unit.
Does either offer app control or smart alerts?
The DELTA 3 connects to the EcoFlow app for time-of-use settings and storm warning alerts, with load and battery status on a phone. No app, Wi-Fi, or Bluetooth control is listed among the Gsike's verified features, so the TELLUS-T1500 Pro runs as a standalone hardware station with its onboard display and controls.
What does the Gsike TELLUS-T1500 Pro cost, and who should choose it?
On the official Gsike US store, the TELLUS-T1500 Pro carries a $910.00 USD price tag. Choose it when light carry, the 600W solar ceiling, protected outlets, 10 ms UPS, and a no-app hardware build fit your household or outdoor setup. Choose the DELTA 3 when six outlets, expansion capacity, app alerts, and higher surge headroom matter more. Verify current prices and bundles on both listings before ordering.
Article Keywords: Gsike TELLUS-T1500 Pro vs EcoFlow DELTA 3, Gsike TELLUS-T1500 Pro, EcoFlow DELTA 3, 1500W solar generator, 1008Wh portable power station, 1024Wh power station comparison, LiFePO4 portable power station, portable power station with UPS, home backup solar generator, solar generator for off-grid cabin, expandable power station, fast charging solar generator, Gsike power station
